Hot Runner Nozzle Heaters(T series)-Huadong instrument

产品列表

您的位置： Product center> Heater> Hot Runner Nozzle Heaters(T series)>

Hot Runner Nozzle Heaters(T series)

φ1.5 Single Outer Sleeve Electric Heater（T2 Type）

所属分类：Hot Runner Nozzle Heaters(T series)

返回上级

打印当前页

产品概述

φ1.5 outer sleeve electric heater is made of high-quality stainless steel,German heating wire,American high-purity magnesium oxide and strict technology, manufactured by automatic devices with independent intangible intellectual property rights. It could be used in the temperature as high as 650°C.

The product adopts close-wound form, double-ended double-tube way, polytetrafluoroethylene insulated wire, cold end leads to the direction of the heater vertical, sleeve stainless steel sleeve heater, Inertia, compact structure, can be easily installed in the hot nozzle.

技术参数

Item	Standard Configuration	Selective Configuration
Protective Tube Material	304	321、316
Sleeve Material	321	316
Voltage	220V	230V、240V
168W～200W Power Consumption Tolerance	+/-10%	——
201W～500W Power Consumption Tolerance	+5%/-10%	——
Length After Coiled	30～280mm	Based on Users’ Demands
Length Tolerance	+/-2.5%	——
Tolerance On Sleeve Length	+/-0.05mm	——
Inner Diameter Length After Coiled	10～42mm	Based on Users’ Demands
Inner Diameter Tolerance ≤20mm	-0.15mm	——
Inner Diameter Tolerance 20～30mm	-0.20mm	——
Inner Diameter Tolerance ≥30mm	-0.25mm	——
Length Of Unheating Zone	45mm	Based on Users’ Demands
Tolerance Length Of Unheating Zone	+/-2.5%	——
Cross Section	φ1.5	φ1.8、φ2.0、φ2.5、2.2×1.5、2.4×1.6
Cross Section Tolerance	+/-0.10mm	——
Max Power Density	9W/cm2	——
Cold zone	φ3.5×40mm	——
Max Working Temperature	650℃	——
Dielectric Strength	600V	——
Lead Wire Length	1000mm	1500mm or Based on Users’ Demands
Surface Processing	Sand-Sprayed	Blackened,Polished